Stable and reliable high resolution Gear Flow Meter
Gear flow meter is a kind of flow meter for measuring volume flow rate with high precision.
With the flow of the medium, the gears mesh and rotate; under the action of fluid flow, the differential pressure is formed at both ends of the instrument's inlet and outlet, and no power supply is required; a pair of gears rotate freely and the cavity between the gears is filled with liquid; the liquid is discharged with the rotation, and the flow rate of the liquid flowing through the instrument can be known by measuring the number of revolutions of the gears.
정확도 등급：
클래스 0.5, 클래스 0.2
주변 온도:
-30℃~60℃
중간 온도:
-20℃~+60℃, 고온 조절 시, 방열판은 고온 60℃～200℃를 더하여 도달할 수 있습니다.
The rotation speed of the gear flow meter is detected by the sensing coil in the signal amplifier installed on the meter housing. The signal amplifier is not in contact with the measured medium.
When the gears of the flow meter cut the magnetic line of force generated by the permanent magnet in the housing, the magnetic flux in the sensing coil will change. The sensing coil sends the detected magnetic flux periodic change signal to the preamplifier, amplifies and shapes the signal, and generates a pulse signal proportional to the flow velocity; the pulse signal is sent to the unit conversion and flow integration circuit to obtain and display the cumulative flow rate value; meanwhile, the pulse signal is also sent to the frequency-current conversion circuit to convert the pulse signal into analog current and then indicate the instantaneous flow rate value. The gear flow meter has high machining precision and is precisely installed. The rotation of the gears is scanned in non-contact form, each tooth generates a pulse, and the resolution is very high. This gear flow meter can measure very small flow rate and quantify small volume liquid.
Calculation formula:
The K coefficient (flow coefficient) of the gear flow meter precisely defines the number of pulses per liter within unit flow rate. The following formula is used:
Q=Instantaneous flow rate m3/h
Q = 3600×F/K
F=Output pulse frequency HZ
K=Coefficient of gear flow meter P/L
Characteristics: The gear flow meter is a new volumetric flow transmitter, which is used for precise continuous or intermittent measurement of the flow rate or instantaneous flow rate of liquid in a pipeline.
It is especially applicable to the flow measurement of high viscosity media such as heavy oil, polyvinyl alcohol, resin, etc. (it can measure the fluid with viscosity up to 10000Pa.s). It has advantages such as small volume, light weight, low vibration noise and stable operation. It can also be used to measure micro-flow rate in a small pipe diameter. It has features such as small startup flow rate and wide range ratio, and is applicable to measuring liquid flow rate with large variation. Its measuring precision is not affected by the changes of pressure and flow rate, and it has stable performance, long service life and large flow capacity.
Model Dimension
에이
비
C
디
E
F
G
시간
GF02
Φ83
80
55
70
G1/4
40
M6
16
GF04
Φ83
80
55
70
G3/8
55
M6
16
GF10
Φ83
80
65
70
G1/2
55
M6
14
GF15
Φ113
110
65
70
G3/4
90
M6
28
GF25
Φ148
140
82
70
G1
110
M8
40
GF32
Φ218
170
105
70
G1-1/4
180
M8
45
The above dimensions are standard product dimensions. In special cases, the product can be customized according to the customer’s site needs.
